Tips for Operation

A manual 5C, 16C or 3J collet fixture may be supplied with the rotary table. All the mounting hardware is supplied with this option. To mount the 5C, 16C or 3J collet fixture, mount the manual 5C, 16C and 3J    fixture to the face plate of the table by using the (4) T-nuts and (4) socket head cap screws (supplied). Place a ground part in the collet and align the fixture before tightening the (4) socket head cap screws.

NOTE: Do not operate this equipment without proper safety training.

WARNING: Do not perform any repairs to this equipment until the table has been disconnected from all electrical and pneumatic circuits.